Alloys

Alloy Grade and Technical Parameters

Filter by material system, supply form, and keywords. Each grade lists available size ranges and comparable standards. If no suitable grade is found, submit your request directly.

Available Grades
80+
Include foil thickness
0.0025 – 10 mm
Bar and rod pipe diameter
Ø0.05 – 100 mm

Nickel alloys

NiCr8020

Ni80Cr20 / 80Ni-20Cr

High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance

Thickness
0.0025 – 3.0 mm
Width
2 – 600 mm
Diameter
Ø0.10 – 8.00 mm
TapeFoilWire
View parameters

Nickel alloys

Evanohms®

Cu-Mn-Ni Precision Resistance Alloy

Low temperature coefficient of resistance, long-term resistance stability, and excellent processability

Thickness
0.0025 – 0.50 mm
Width
1 – 300 mm
TapeFoil
View parameters

Nickel alloys

Custantan®

Cu-Mn-Ni low thermoelectric potential resistance alloy

Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift

Thickness
0.0025 – 0.50 mm
Width
1 – 300 mm
TapeFoil
View parameters

Nickel alloys

Ni200

Pure Nickel 99.6%

High electrical and thermal conductivity, resistance to alkali and neutral medium corrosion, and excellent deep-drawing performance

Thickness
0.001 – 5.00 mm
Width
2 – 1000 mm
Diameter
Ø0.50 – 60.00 mm
TapeFoilPipes
View parameters

Nickel alloys

Inconel 625

UNS N06625

High-temperature strength, fatigue resistance, and chloride stress corrosion cracking resistance

Thickness
0.05 – 3.00 mm
Width
5 – 600 mm
TapeFoil
View parameters

Nickel alloys

Hastelloy® C-22

New

UNS N06022

Resists corrosion in oxidizing and non-oxidizing media; resists pitting and crevice corrosion.

Thickness
0.01 – 3.00 mm
Width
5 – 600 mm
TapeFoil
View parameters

Nickel alloys

H-C276

New

Hastelloy® C-276 / UNS N10276

Resistant to mixed acids and wet chlorine; resists pitting and crevice corrosion; maintains intergranular corrosion resistance in the heat-affected zone after welding.

Thickness
0.01 – 3.00 mm
Width
5 – 600 mm
Diameter
Ø6.00 – 100.00 mm
TapeFoilBarPipes
View parameters

Nickel alloys

Kovar

4J29 / UNS K94610

Coefficient of thermal expansion matches borosilicate glass and ceramics; hermetic sealable; nickel-platable

Thickness
0.01 – 3.00 mm
Width
5 – 300 mm
Diameter
Ø3.00 – 80.00 mm
TapeBarPipes
View parameters

Nickel alloys

Invar

4J36 / UNS K93600

Low thermal expansion and dimensional stability near room temperature; ideal for precision structural components

Thickness
0.01 – 3.00 mm
Width
5 – 300 mm
Diameter
Ø3.00 – 80.00 mm
TapeBar
View parameters

Nickel alloys

Monel 400

UNS N04400 / 2.4360

Saltwater, hydrofluoric acid resistant; excellent machinability; medium strength

Thickness
0.05 – 3.00 mm
Width
5 – 600 mm
Diameter
Ø6.00 – 100.00 mm
TapeFoilBarPipes
View parameters

Nickel alloys

Inconel 600

UNS N06600 / 2.4816

High-temperature oxidation resistance, alkali and chloride stress corrosion resistance, and stable high-temperature strength

Thickness
0.05 – 3.00 mm
Width
5 – 600 mm
Diameter
Ø6.00 – 100.00 mm
TapeFoilBarPipes
View parameters

Nickel alloys

Inconel 718

UNS N07718 / 2.4668

Precipitation-hardening superalloy; stable strength from cryogenic temperatures up to 650 °C; fatigue resistant

Thickness
0.05 – 3.00 mm
Width
5 – 400 mm
Diameter
Ø6.00 – 100.00 mm
TapeFoilBarPipes
View parameters

Nickel alloys

Inconel 725

UNS N07725

Balances high strength with corrosion resistance and resists sulfide stress cracking

Thickness
0.10 – 3.00 mm
Width
5 – 400 mm
Diameter
Ø10.00 – 120.00 mm
TapeBarPipes
View parameters

Nickel alloys

Inconel X-750 / 751

UNS N07750 / N07751

High-temperature springs and fasteners: Commonly used, anti-relaxation, oxidation-resistant

Thickness
0.05 – 3.00 mm
Width
5 – 300 mm
Diameter
Ø3.00 – 60.00 mm
TapeFoilBar
View parameters

Nickel alloys

Hastelloy® C-4

UNS N06455 / 2.4610

Low carbon, low silicon; weldable with resistance to intergranular corrosion and mixed acids/wet chlorine

Thickness
0.05 – 3.00 mm
Width
5 – 600 mm
Diameter
Ø6.00 – 100.00 mm
TapeFoilBarPipes
View parameters

Nickel alloys

Incoloy 800 / 800H / 800HT

UNS N08800 / N08810 / N08811

High-temperature oxidation resistance, carburization resistance, and creep strength increase with H / HT grades.

Thickness
0.10 – 3.00 mm
Width
5 – 600 mm
Diameter
Ø6.00 – 100.00 mm
TapeFoilPipesBar
View parameters

Nickel alloys

Incoloy 825

UNS N08825 / 2.4858

Resistant to sulfuric and phosphoric acids; stress corrosion cracking, pitting

Thickness
0.05 – 3.00 mm
Width
5 – 600 mm
Diameter
Ø6.00 – 100.00 mm
TapeFoilPipesBar
View parameters

Nickel alloys

Nimonic 80A / 90

UNS N07080 / N07090

High creep strength at elevated temperatures, resistant to gas corrosion, ideal for turbine and spring components.

Thickness
0.10 – 3.00 mm
Width
5 – 300 mm
Diameter
Ø3.00 – 80.00 mm
TapeBarWire
View parameters

Nickel alloys

Alloy 42

42Ni-Fe / UNS K94100

Low thermal expansion, compatible with hard glass and ceramic sealing, nickel and gold plateable

Thickness
0.02 – 2.00 mm
Width
2 – 300 mm
TapeFoilBar
View parameters

Nickel alloys

Alloy 46

46Ni-Fe / UNS K94600

Coefficient of thermal expansion between Alloy 42 and Alloy 48; select to match glass.

Thickness
0.02 – 2.00 mm
Width
2 – 300 mm
TapeFoil
View parameters

Nickel alloys

Alloy 48

48Ni-Fe / UNS K94800

Compatible with soft glass sealing, excellent airtightness, and superior machinability

Thickness
0.02 – 2.00 mm
Width
2 – 300 mm
TapeFoil
View parameters

Nickel alloys

Alloy 50

50Ni-Fe

High coefficient of thermal expansion, suitable for sealing with soft glass, and usable as shielding or structural components

Thickness
0.02 – 2.00 mm
Width
2 – 300 mm
TapeFoil
View parameters

Nickel alloys

MU80

80Ni-Fe High-Permeability Alloy

High permeability, low coercivity; ideal for magnetic shielding and cores

Thickness
0.05 – 2.00 mm
Width
2 – 300 mm
TapeFoil
View parameters

Nickel alloys

HYMU80

High-purity 80Ni-Fe magnetic alloy

Pure refined melting, higher permeability, lower coercivity

Thickness
0.05 – 1.00 mm
Width
2 – 300 mm
TapeFoil
View parameters

Nickel alloys

Elgiloy

Co-Cr-Ni-Mo Elastic Alloy / UNS R30003

High elasticity, fatigue resistant, corrosion resistant, non-magnetic

Thickness
0.02 – 2.00 mm
Width
2 – 200 mm
Diameter
Ø0.10 – 8.00 mm
TapeFoilWire
View parameters

Nickel alloys

Ni-Span-C 902

Elinvar Alloy / UNS N09902

Low temperature coefficient of elastic modulus, stable frequency, and resistance to relaxation

Thickness
0.05 – 1.50 mm
Width
2 – 200 mm
Diameter
Ø0.10 – 6.00 mm
TapeFoilWire
View parameters

Nickel alloys

Super Invar

Ultra-low expansion alloy / UNS K93500

Extremely low coefficient of thermal expansion, high dimensional stability, ideal for precision optical structures

Thickness
0.10 – 3.00 mm
Width
5 – 300 mm
Diameter
Ø5.00 – 80.00 mm
TapeBar
View parameters

Nickel alloys

Hiperco 50

Iron-Cobalt Soft Magnetic Alloy / UNS R30005

High saturation magnetic flux, large magnetostriction, suitable for high-power magnetic circuits

Thickness
0.05 – 2.00 mm
Width
5 – 300 mm
Diameter
Ø5.00 – 80.00 mm
TapeBar
View parameters

Copper alloys

CuBe2

Alloy 25 / C17200 / CW101C

High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable

Thickness
0.03 – 3.00 mm
Width
2 – 400 mm
Diameter
Ø1.00 – 60.00 mm
TapeBarWire
View parameters

Copper alloys

CuBe2 Hardened

25 Alloy hardened / C17200 / CW101C

Supplied in work-hardened condition; high strength after forming with minimal springback

Thickness
0.03 – 1.50 mm
Width
2 – 400 mm
Tape
View parameters

Copper alloys

CuNi2Be

Alloy 3 / C17510 / CW110C

Higher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.

Thickness
0.05 – 3.00 mm
Width
2 – 400 mm
Diameter
Ø2.00 – 50.00 mm
TapeBar
View parameters

Welding and Brazing Materials

BNi-2

Nickel-based Brazing Filler Metal Ni-7Cr-3Fe-4.5Si-3.2B

Universal nickel-based brazing filler metal; suitable for brazing stainless steels and nickel-based alloys in vacuum or controlled atmospheres.

Thickness
0.02 – 0.10 mm
Width
3 – 100 mm
TapeWelding wire
View parameters

Welding and Brazing Materials

BNi-5

Nickel-based brazing filler metal Ni-19Cr-10Si

Boron-free, excellent corrosion resistance in braze joints, ideal for thin-walled parts and narrow gaps

Thickness
0.02 – 0.10 mm
Width
3 – 100 mm
TapeWelding wire
View parameters

Welding and Brazing Materials

BNi-7

Nickel-based Brazing Alloy Ni-14Cr-10P

Low melting point, excellent flowability, ideal for narrow gaps and multi-layer structures

Thickness
0.02 – 0.08 mm
Width
3 – 100 mm
TapeWelding wire
View parameters

Welding and Brazing Materials

S-Ni1066

Nickel-based solid wire

Nickel-based solid wire, stable arc, low spatter, uniform weld bead

Diameter
Ø0.80 – 4.00 mm
Welding wire
View parameters

Welding and Brazing Materials

S-Ni6625

Nickel-based Solid Wire (High Nickel)

High-nickel composition, excellent crack resistance, and superior performance in high-temperature conditions.

Diameter
Ø0.80 – 4.00 mm
Welding wire
View parameters

Welding and Brazing Materials

S-Ni4060

Nickel-Copper Solid Wire

Nickel-copper alloy, corrosion-resistant, dense welds

Diameter
Ø0.80 – 4.00 mm
Welding wire
View parameters

Welding and Brazing Materials

S-Ni2061

Nickel-Chromium Solid Wire

Nickel-chromium composition, oxidation-resistant, stable high-temperature strength

Diameter
Ø0.80 – 4.00 mm
Welding wire
View parameters

Welding and Brazing Materials

S-Ni6082

High-nickel solid wire

High-nickel composition, excellent ductility and toughness, suitable for dissimilar steel welding

Diameter
Ø0.80 – 4.00 mm
Welding wire
View parameters

Copper alloys

C10100

Oxygen-Free Copper OFE (Cu ≥ 99.99%)

Oxygen-free high conductivity, low hydrogen embrittlement risk, excellent machinability and weldability

Thickness
0.02 – 3.00 mm
Width
2 – 600 mm
TapeFoilBar
View parameters

Copper alloys

C11000

Electrolytic Tough Pitch (ETP) Copper

High electrical and thermal conductivity, cost-effective, excellent formability and weldability

Thickness
0.02 – 3.00 mm
Width
2 – 600 mm
TapeFoilBar
View parameters

Copper alloys

C12200

Phosphorus-deoxidized copper DHP

Good phosphorus-deoxidized, weldable, brazable, and corrosion-resistant

Thickness
0.05 – 3.00 mm
Width
3 – 600 mm
Diameter
Ø4.00 – 80.00 mm
TapePipesBar
View parameters

Copper alloys

C26000

Brass Casings 70/30

Excellent deep drawability, balanced strength and ductility, smooth surface finish

Thickness
0.03 – 2.00 mm
Width
3 – 600 mm
TapeFoil
View parameters

Copper alloys

C36000

Free-cutting Brass

Excellent machinability, stable dimensional accuracy, and ideal for automatic lathes.

Diameter
Ø3.00 – 80.00 mm
Bar
View parameters

Copper alloys

C46400

Navy Brass

Seawater corrosion-resistant, anti-dezincification, medium strength

Diameter
Ø6.00 – 100.00 mm
BarPipes
View parameters

Copper alloys

C51900

Phosphor Bronze 6% Sn

High elasticity, fatigue-resistant, and moderate conductivity

Thickness
0.03 – 2.00 mm
Width
2 – 400 mm
TapeFoil
View parameters

Copper alloys

C52100

Phosphor Bronze 8% Sn

Highly elastic, resistant to stress relaxation, and wear-resistant

Thickness
0.03 – 1.50 mm
Width
2 – 400 mm
TapeFoil
View parameters

Copper alloys

C61300

Aluminum Bronze 7% Al

Corrosion-resistant, wear-resistant, and impact-resistant; weldable

Thickness
0.10 – 3.00 mm
Width
5 – 400 mm
Diameter
Ø6.00 – 100.00 mm
TapeBarPipes
View parameters

Copper alloys

C63000

Nickel Aluminum Bronze

High strength, wear- and corrosion-resistant, cavitation-resistant

Diameter
Ø10.00 – 120.00 mm
BarPipes
View parameters

Copper alloys

C70250

Copper-nickel-silicon alloy

Balanced strength and conductivity, stress-relaxation resistance, and age-hardenable

Thickness
0.05 – 1.50 mm
Width
5 – 600 mm
TapeFoil
View parameters

Copper alloys

C70600

Cupronickel B10 (90/10)

Seawater-resistant, anti-fouling, and high thermal conductivity

Thickness
0.10 – 3.00 mm
Width
5 – 400 mm
Diameter
Ø6.00 – 80.00 mm
TapePipes
View parameters

Copper alloys

C71500

White Copper B30 (70/30)

Resistant to high-speed seawater erosion, stress corrosion cracking, and offers high strength.

Thickness
0.10 – 3.00 mm
Width
5 – 400 mm
Diameter
Ø6.00 – 80.00 mm
TapePipes
View parameters

Copper alloys

C75400

Nickel silver 15% Ni

Silver-white, corrosion-resistant, with excellent machinability and electroplating performance

Thickness
0.05 – 2.00 mm
Width
3 – 300 mm
TapeFoil
View parameters

Copper alloys

C86300

Manganese Bronze

High load-bearing capacity, wear-resistant, and impact-resistant

Diameter
Ø20.00 – 150.00 mm
BarPipes
View parameters

High-purity metals

Ni 99.99%

High-purity nickel

Low impurity content, low gas element content, and clean surface

Thickness
0.01 – 3.00 mm
Width
2 – 500 mm
Diameter
Ø0.50 – 50.00 mm
TapeFoilBar
View parameters

Other alloys

1.2709

18Ni Maraging Steel

High-strength, dimensionally stable, and tough after age hardening

Thickness
0.10 – 6.00 mm
Width
10 – 600 mm
Diameter
Ø3.00 – 100.00 mm
TapeBar
View parameters

Other alloys

1.4310

301 Stainless Steel

High elasticity, excellent atmospheric corrosion resistance, and significant cold-work hardening

Thickness
0.005 – 3.00 mm
Width
2 – 1200 mm
TapeFoil
View parameters

Other alloys

316 Stainless

06Cr17Ni12Mo2 / UNS S31600 / 1.4401

Molybdenum-containing, pitting and chloride-resistant, excellent formability and weldability

Thickness
0.005 – 3.00 mm
Width
3 – 600 mm
Diameter
Ø3.00 – 100.00 mm
TapeFoilBarPipes
View parameters

Other alloys

316L Stainless

022Cr17Ni12Mo2 / UNS S31603 / 1.4404

Ultra-low carbon, intergranular corrosion resistant after welding, excellent deep-draw formability

Thickness
0.005 – 3.00 mm
Width
3 – 600 mm
Diameter
Ø3.00 – 100.00 mm
TapeFoilBarPipes
View parameters

Other alloys

304 / 30 4L Stainless

06Cr19Ni10 / 022Cr19Ni10 / S30400 / S30403 / 1.4301 / 1.4307

General-purpose: excellent corrosion resistance, formability, and weldability; 304L low-carbon grade with improved resistance to intergranular corrosion after welding.

Thickness
0.005 – 3.00 mm
Width
3 – 600 mm
Diameter
Ø3.00 – 100.00 mm
TapeFoilBarPipes
View parameters

Other alloys

300 / 400 Series Stainless

301 / 302 / 303 / 305 / 310 / 441 / 430 / 420 / 630 / 631 / 632

Covers austenitic, ferritic, martensitic, and precipitation-hardening stainless steels. Select based on strength, corrosion resistance, and magnetic properties.

Thickness
0.005 – 3.00 mm
Width
3 – 600 mm
TapeFoilBar
View parameters

Other alloys

Titanium Alloys

Gr1 / Gr2 / Gr5 (Ti-6Al-4V) / Gr9

High strength-to-weight ratio, excellent corrosion resistance; select pure titanium or alloy grades based on application.

Thickness
0.01 – 3.00 mm
Width
3 – 500 mm
Diameter
Ø3.00 – 100.00 mm
TapeFoilBarPipes
View parameters

High-purity metals

Cu 99.99%

High-Purity Copper / Oxygen-Free Copper

Low oxygen content, high electrical and thermal conductivity, easy to solder and deep draw

Thickness
0.02 – 5.00 mm
Width
2 – 1000 mm
Diameter
Ø1.00 – 100.00 mm
TapeFoilPipes
View parameters

High-purity metals

AI 99.99%

High-Purity Aluminum

Low density, high electrical and thermal conductivity, clean surface

Thickness
0.006 – 3.00 mm
Width
2 – 1000 mm
TapeFoil
View parameters

High-purity metals

Ti 99.9%

High-purity titanium

High specific strength, corrosion resistance, and excellent biocompatibility

Thickness
0.02 – 3.00 mm
Width
5 – 600 mm
Diameter
Ø3.00 – 50.00 mm
TapeFoilBar
View parameters

High-purity metals

Up to 99.95%

High-purity molybdenum

High melting point, high-temperature strength, low thermal expansion

Thickness
0.02 – 2.00 mm
Width
3 – 400 mm
Diameter
Ø2.00 – 60.00 mm
TapeFoilBar
View parameters

High-purity metals

99.95% off

High-purity Tungsten

Extremely high melting point, low vapor pressure, and resistance to high-temperature creep

Thickness
0.02 – 1.00 mm
Width
3 – 300 mm
Diameter
Ø1.00 – 30.00 mm
FoilBar
View parameters

High-purity metals

Co 99.95%

High-purity cobalt

High hardness, high-temperature resistance, and stable magnetic properties

Thickness
0.05 – 2.00 mm
Width
5 – 400 mm
Diameter
Ø1.00 – 40.00 mm
TapeFoilBar
View parameters

High-purity metals

Set 99.5%

High-purity zirconium

Corrosion-resistant, low neutron absorption cross-section, and excellent machinability

Thickness
0.05 – 3.00 mm
Width
5 – 500 mm
Diameter
Ø6.00 – 100.00 mm
TapePipes
View parameters

High-purity metals

Zn 99.995%

High-purity Zinc

Low impurity, atmospheric corrosion resistant, easy to machine

Thickness
0.05 – 3.00 mm
Width
5 – 600 mm
TapeFoil
View parameters

High-purity metals

Pb 99.99%

High-Purity Lead

High density, acid/alkali resistant, easy to machine

Thickness
0.05 – 6.00 mm
Width
5 – 600 mm
Diameter
Ø5.00 – 100.00 mm
TapeFoilBar
View parameters

High-purity metals

Sn 99.99%

High-purity Tin

Low melting point, excellent solderability, and oxidation resistance

Thickness
0.05 – 3.00 mm
Width
5 – 600 mm
TapeFoil
View parameters

High-purity metals

Mg 99.95%

High-purity magnesium

Ultra-low density, excellent damping performance, easy to process

Thickness
0.05 – 3.00 mm
Width
5 – 500 mm
TapeFoil
View parameters

Clad materials

Copper-Steel Clad

Copper-Steel Composite Strip

Combines copper layer conductivity with steel layer strength; clad thickness is customizable by ratio.

Thickness
0.015 – 1.50 mm
Width
3 – 100 mm
TapeFoil
View parameters

Clad materials

Ni-Cu Clad

Nickel-Copper Composite Strip

Combines corrosion resistance of nickel with conductivity of copper, featuring strong interfacial bonding and localized composite capability by strip position.

Thickness
0.015 – 1.50 mm
Width
3 – 100 mm
TapeFoil
View parameters

Clad materials

Copper / Copper-Alloy Clad

Copper and Copper Alloy Composite Strip

Conductive and structural layers are clearly separated, with adjustable layer ratios and localized composite bonding by strip position.

Thickness
0.015 – 1.50 mm
Width
3 – 100 mm
TapeFoil
View parameters

Clad materials

Nickel Alloy Cladding

Nickel Alloy Composite Strip

Nickel-based cladding offers corrosion resistance, strong interfacial bonding, and compatibility with steel or copper substrates.

Thickness
0.015 – 1.50 mm
Width
3 – 100 mm
TapeFoil
View parameters

Clad materials

Titanium Alloy Clad

Titanium Alloy Composite Strip

Titanium clad layer: corrosion-resistant to seawater and chloride ions, lightweight, and composite-compatible with steel or copper.

Thickness
0.015 – 1.50 mm
Width
3 – 100 mm
TapeFoil
View parameters

Clad materials

Stainless Clad

Stainless Steel Composite Strip (304 / 316L Cladding)

Stainless steel cladding offers corrosion resistance; base material can be carbon steel or copper; localized composite bonding available by strip position.

Thickness
0.015 – 1.50 mm
Width
3 – 100 mm
TapeFoil
View parameters

Clad materials

Custom Cladding

Other composite materials

Multi-layer or multi-tier composite with local inlays, layered positions arranged per drawing

Thickness
0.015 – 1.50 mm
Width
3 – 100 mm
TapeFoil
View parameters

The listed grades are examples only. Actual available grades are subject to the quotation and warranty documents. Performance data varies by specification and condition; please request separately for items marked "Data under update."