Alloys
Alloy Grade and Technical Parameters
Filter by material system, supply form, and keywords. Each grade lists available size ranges and comparable standards. If no suitable grade is found, submit your request directly.
- Available Grades
- 80+
- Include foil thickness
- 0.0025 – 10 mm
- Bar and rod pipe diameter
- Ø0.05 – 100 mm
18 个牌号 · 铜合金
Materials ListCopper alloys
CuBe2
Alloy 25 / C17200 / CW101C
High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable
- Thickness
- 0.03 – 3.00 mm
- Width
- 2 – 400 mm
- Diameter
- Ø1.00 – 60.00 mm
Copper alloys
CuBe2 Hardened
25 Alloy hardened / C17200 / CW101C
Supplied in work-hardened condition; high strength after forming with minimal springback
- Thickness
- 0.03 – 1.50 mm
- Width
- 2 – 400 mm
Copper alloys
CuNi2Be
Alloy 3 / C17510 / CW110C
Higher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.
- Thickness
- 0.05 – 3.00 mm
- Width
- 2 – 400 mm
- Diameter
- Ø2.00 – 50.00 mm
Copper alloys
C10100
Oxygen-Free Copper OFE (Cu ≥ 99.99%)
Oxygen-free high conductivity, low hydrogen embrittlement risk, excellent machinability and weldability
- Thickness
- 0.02 – 3.00 mm
- Width
- 2 – 600 mm
Copper alloys
C11000
Electrolytic Tough Pitch (ETP) Copper
High electrical and thermal conductivity, cost-effective, excellent formability and weldability
- Thickness
- 0.02 – 3.00 mm
- Width
- 2 – 600 mm
Copper alloys
C12200
Phosphorus-deoxidized copper DHP
Good phosphorus-deoxidized, weldable, brazable, and corrosion-resistant
- Thickness
- 0.05 – 3.00 mm
- Width
- 3 – 600 mm
- Diameter
- Ø4.00 – 80.00 mm
Copper alloys
C26000
Brass Casings 70/30
Excellent deep drawability, balanced strength and ductility, smooth surface finish
- Thickness
- 0.03 – 2.00 mm
- Width
- 3 – 600 mm
Copper alloys
C36000
Free-cutting Brass
Excellent machinability, stable dimensional accuracy, and ideal for automatic lathes.
- Diameter
- Ø3.00 – 80.00 mm
Copper alloys
C46400
Navy Brass
Seawater corrosion-resistant, anti-dezincification, medium strength
- Diameter
- Ø6.00 – 100.00 mm
Copper alloys
C51900
Phosphor Bronze 6% Sn
High elasticity, fatigue-resistant, and moderate conductivity
- Thickness
- 0.03 – 2.00 mm
- Width
- 2 – 400 mm
Copper alloys
C52100
Phosphor Bronze 8% Sn
Highly elastic, resistant to stress relaxation, and wear-resistant
- Thickness
- 0.03 – 1.50 mm
- Width
- 2 – 400 mm
Copper alloys
C61300
Aluminum Bronze 7% Al
Corrosion-resistant, wear-resistant, and impact-resistant; weldable
- Thickness
- 0.10 – 3.00 mm
- Width
- 5 – 400 mm
- Diameter
- Ø6.00 – 100.00 mm
Copper alloys
C63000
Nickel Aluminum Bronze
High strength, wear- and corrosion-resistant, cavitation-resistant
- Diameter
- Ø10.00 – 120.00 mm
Copper alloys
C70250
Copper-nickel-silicon alloy
Balanced strength and conductivity, stress-relaxation resistance, and age-hardenable
- Thickness
- 0.05 – 1.50 mm
- Width
- 5 – 600 mm
Copper alloys
C70600
Cupronickel B10 (90/10)
Seawater-resistant, anti-fouling, and high thermal conductivity
- Thickness
- 0.10 – 3.00 mm
- Width
- 5 – 400 mm
- Diameter
- Ø6.00 – 80.00 mm
Copper alloys
C71500
White Copper B30 (70/30)
Resistant to high-speed seawater erosion, stress corrosion cracking, and offers high strength.
- Thickness
- 0.10 – 3.00 mm
- Width
- 5 – 400 mm
- Diameter
- Ø6.00 – 80.00 mm
Copper alloys
C75400
Nickel silver 15% Ni
Silver-white, corrosion-resistant, with excellent machinability and electroplating performance
- Thickness
- 0.05 – 2.00 mm
- Width
- 3 – 300 mm
Copper alloys
C86300
Manganese Bronze
High load-bearing capacity, wear-resistant, and impact-resistant
- Diameter
- Ø20.00 – 150.00 mm
The listed grades are examples only. Actual available grades are subject to the quotation and warranty documents. Performance data varies by specification and condition; please request separately for items marked "Data under update."