Copper alloys
C70600
Seawater-resistant, anti-fouling, and high thermal conductivity
- Material System
- Copper Alloy
- Available Forms
- Strip / Tube
- Thickness Range
- 0.10 – 3.00 mm

Material Overview
Copper-nickel alloy (90/10) strip and tube: corrosion- and fouling-resistant in seawater; used for seawater piping, condenser tubes, and heat exchangers.
Alias / Benchmark:Cupronickel B10 (90/10)
Available Forms
Strip · Tube
Thickness / Diameter
0.10 – 3.00 mm/ Ø6.00 – 80.00 mm
Width
5 – 400 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 275 MPa (annealed) |
| Thermal Conductivity | Approximately 45 W/(m·K) |
| Compatible Media | Seawater / Brackish water |
| Supply Status | Annealing |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
ASTM B111ASTM B466
Typical Applications
- Seawater piping system
- Condenser tube
- Heat Exchanger
Same category brand
- CuBe2High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable
- CuBe2 HardenedSupplied in work-hardened condition; high strength after forming with minimal springback
- CuNi2BeHigher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.