Copper alloys
CuBe2 Hardened
Supplied in work-hardened condition; high strength after forming with minimal springback
- Material System
- Copper Alloy
- Available Forms
- Tape
- Thickness Range
- 0.03 – 1.50 mm

Material Overview
Beryllium Copper Alloy 25 rolled hardened strip, ideal for stamped parts that do not require subsequent solution treatment. Used for high-elasticity springs, contacts, and precision stamped components.
Alias / Benchmark:25 Alloy hardened / C17200 / CW101C
Available Forms
Tape
Thickness / Diameter
0.03 – 1.50 mm
Width
2 – 400 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | 1200 – 1550 MPa |
| Hardness | HV 360 – 430 |
| Supply Status | Hardened (mill hardened) |
| Flatness | Delivered after stress bending and straightening |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
ASTM B194UNS C7200 / CW101C
Typical Applications
- High-elasticity spring leaf
- Contact
- Precision Stamped Parts
Same category brand
- CuBe2High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable
- CuNi2BeHigher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.
- C10100Oxygen-free high conductivity, low hydrogen embrittlement risk, excellent machinability and weldability