Alloys
Alloy Grade and Technical Parameters
Filter by material system, supply form, and keywords. Each grade lists available size ranges and comparable standards. If no suitable grade is found, submit your request directly.
- Available Grades
- 80+
- Include foil thickness
- 0.0025 – 10 mm
- Bar and rod pipe diameter
- Ø0.05 – 100 mm
28 grades · Nickel alloys
Materials ListNickel alloys
NiCr8020
Ni80Cr20 / 80Ni-20Cr
High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance
- Thickness
- 0.0025 – 3.0 mm
- Width
- 2 – 600 mm
- Diameter
- Ø0.10 – 8.00 mm
Nickel alloys
Evanohms®
Cu-Mn-Ni Precision Resistance Alloy
Low temperature coefficient of resistance, long-term resistance stability, and excellent processability
- Thickness
- 0.0025 – 0.50 mm
- Width
- 1 – 300 mm
Nickel alloys
Custantan®
Cu-Mn-Ni low thermoelectric potential resistance alloy
Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift
- Thickness
- 0.0025 – 0.50 mm
- Width
- 1 – 300 mm
Nickel alloys
Ni200
Pure Nickel 99.6%
High electrical and thermal conductivity, resistance to alkali and neutral medium corrosion, and excellent deep-drawing performance
- Thickness
- 0.001 – 5.00 mm
- Width
- 2 – 1000 mm
- Diameter
- Ø0.50 – 60.00 mm
Nickel alloys
Inconel 625
UNS N06625
High-temperature strength, fatigue resistance, and chloride stress corrosion cracking resistance
- Thickness
- 0.05 – 3.00 mm
- Width
- 5 – 600 mm
Nickel alloys
Hastelloy® C-22
UNS N06022
Resists corrosion in oxidizing and non-oxidizing media; resists pitting and crevice corrosion.
- Thickness
- 0.01 – 3.00 mm
- Width
- 5 – 600 mm
Nickel alloys
H-C276
Hastelloy® C-276 / UNS N10276
Resistant to mixed acids and wet chlorine; resists pitting and crevice corrosion; maintains intergranular corrosion resistance in the heat-affected zone after welding.
- Thickness
- 0.01 – 3.00 mm
- Width
- 5 – 600 mm
- Diameter
- Ø6.00 – 100.00 mm
Nickel alloys
Kovar
4J29 / UNS K94610
Coefficient of thermal expansion matches borosilicate glass and ceramics; hermetic sealable; nickel-platable
- Thickness
- 0.01 – 3.00 mm
- Width
- 5 – 300 mm
- Diameter
- Ø3.00 – 80.00 mm
Nickel alloys
Invar
4J36 / UNS K93600
Low thermal expansion and dimensional stability near room temperature; ideal for precision structural components
- Thickness
- 0.01 – 3.00 mm
- Width
- 5 – 300 mm
- Diameter
- Ø3.00 – 80.00 mm
Nickel alloys
Monel 400
UNS N04400 / 2.4360
Saltwater, hydrofluoric acid resistant; excellent machinability; medium strength
- Thickness
- 0.05 – 3.00 mm
- Width
- 5 – 600 mm
- Diameter
- Ø6.00 – 100.00 mm
Nickel alloys
Inconel 600
UNS N06600 / 2.4816
High-temperature oxidation resistance, alkali and chloride stress corrosion resistance, and stable high-temperature strength
- Thickness
- 0.05 – 3.00 mm
- Width
- 5 – 600 mm
- Diameter
- Ø6.00 – 100.00 mm
Nickel alloys
Inconel 718
UNS N07718 / 2.4668
Precipitation-hardening superalloy; stable strength from cryogenic temperatures up to 650 °C; fatigue resistant
- Thickness
- 0.05 – 3.00 mm
- Width
- 5 – 400 mm
- Diameter
- Ø6.00 – 100.00 mm
Nickel alloys
Inconel 725
UNS N07725
Balances high strength with corrosion resistance and resists sulfide stress cracking
- Thickness
- 0.10 – 3.00 mm
- Width
- 5 – 400 mm
- Diameter
- Ø10.00 – 120.00 mm
Nickel alloys
Inconel X-750 / 751
UNS N07750 / N07751
High-temperature springs and fasteners: Commonly used, anti-relaxation, oxidation-resistant
- Thickness
- 0.05 – 3.00 mm
- Width
- 5 – 300 mm
- Diameter
- Ø3.00 – 60.00 mm
Nickel alloys
Hastelloy® C-4
UNS N06455 / 2.4610
Low carbon, low silicon; weldable with resistance to intergranular corrosion and mixed acids/wet chlorine
- Thickness
- 0.05 – 3.00 mm
- Width
- 5 – 600 mm
- Diameter
- Ø6.00 – 100.00 mm
Nickel alloys
Incoloy 800 / 800H / 800HT
UNS N08800 / N08810 / N08811
High-temperature oxidation resistance, carburization resistance, and creep strength increase with H / HT grades.
- Thickness
- 0.10 – 3.00 mm
- Width
- 5 – 600 mm
- Diameter
- Ø6.00 – 100.00 mm
Nickel alloys
Incoloy 825
UNS N08825 / 2.4858
Resistant to sulfuric and phosphoric acids; stress corrosion cracking, pitting
- Thickness
- 0.05 – 3.00 mm
- Width
- 5 – 600 mm
- Diameter
- Ø6.00 – 100.00 mm
Nickel alloys
Nimonic 80A / 90
UNS N07080 / N07090
High creep strength at elevated temperatures, resistant to gas corrosion, ideal for turbine and spring components.
- Thickness
- 0.10 – 3.00 mm
- Width
- 5 – 300 mm
- Diameter
- Ø3.00 – 80.00 mm
Nickel alloys
Alloy 42
42Ni-Fe / UNS K94100
Low thermal expansion, compatible with hard glass and ceramic sealing, nickel and gold plateable
- Thickness
- 0.02 – 2.00 mm
- Width
- 2 – 300 mm
Nickel alloys
Alloy 46
46Ni-Fe / UNS K94600
Coefficient of thermal expansion between Alloy 42 and Alloy 48; select to match glass.
- Thickness
- 0.02 – 2.00 mm
- Width
- 2 – 300 mm
Nickel alloys
Alloy 48
48Ni-Fe / UNS K94800
Compatible with soft glass sealing, excellent airtightness, and superior machinability
- Thickness
- 0.02 – 2.00 mm
- Width
- 2 – 300 mm
Nickel alloys
Alloy 50
50Ni-Fe
High coefficient of thermal expansion, suitable for sealing with soft glass, and usable as shielding or structural components
- Thickness
- 0.02 – 2.00 mm
- Width
- 2 – 300 mm
Nickel alloys
MU80
80Ni-Fe High-Permeability Alloy
High permeability, low coercivity; ideal for magnetic shielding and cores
- Thickness
- 0.05 – 2.00 mm
- Width
- 2 – 300 mm
Nickel alloys
HYMU80
High-purity 80Ni-Fe magnetic alloy
Pure refined melting, higher permeability, lower coercivity
- Thickness
- 0.05 – 1.00 mm
- Width
- 2 – 300 mm
Nickel alloys
Elgiloy
Co-Cr-Ni-Mo Elastic Alloy / UNS R30003
High elasticity, fatigue resistant, corrosion resistant, non-magnetic
- Thickness
- 0.02 – 2.00 mm
- Width
- 2 – 200 mm
- Diameter
- Ø0.10 – 8.00 mm
Nickel alloys
Ni-Span-C 902
Elinvar Alloy / UNS N09902
Low temperature coefficient of elastic modulus, stable frequency, and resistance to relaxation
- Thickness
- 0.05 – 1.50 mm
- Width
- 2 – 200 mm
- Diameter
- Ø0.10 – 6.00 mm
Nickel alloys
Super Invar
Ultra-low expansion alloy / UNS K93500
Extremely low coefficient of thermal expansion, high dimensional stability, ideal for precision optical structures
- Thickness
- 0.10 – 3.00 mm
- Width
- 5 – 300 mm
- Diameter
- Ø5.00 – 80.00 mm
Nickel alloys
Hiperco 50
Iron-Cobalt Soft Magnetic Alloy / UNS R30005
High saturation magnetic flux, large magnetostriction, suitable for high-power magnetic circuits
- Thickness
- 0.05 – 2.00 mm
- Width
- 5 – 300 mm
- Diameter
- Ø5.00 – 80.00 mm
The listed grades are examples only. Actual available grades are subject to the quotation and warranty documents. Performance data varies by specification and condition; please request separately for items marked "Data under update."