Nickel alloys
Incoloy 800 / 800H / 800HT
High-temperature oxidation resistance, carburization resistance, and creep strength increase with H / HT grades.
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil / Tube / Bar
- Thickness Range
- 0.10 – 3.00 mm

Material Overview
Iron-Nickel-Chromium Alloy (800 Series): 800 is the general-purpose grade; 800H enhances carbon and grain size control; 800HT further improves creep strength. Used in cracking furnace tubes, heating element sheaths, and internal furnace components.
Alias / Benchmark:UNS N08800 / N08810 / N08811
Available Forms
Tapes · Foils · Tubes · Bars
Thickness / Diameter
0.10 – 3.00 mm/ Ø6.00 – 100.00 mm
Width
5 – 600 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 520 MPa (annealed) |
| Yield Strength | ≥ 205 MPa (annealed) |
| Operating temperature | ≤ 1100 °C (800H / 800HT) |
| Supply Status | Annealing / Solution |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Cracking Furnace Tubes
- Heating element sheath
- Heat Treatment Furnure Internal Components
Same category brand
- NiCr8020High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance
- Evanohms®Low temperature coefficient of resistance, long-term resistance stability, and excellent processability
- Custantan®Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift