Technical support

Resolve technical issues before requesting a quote.

A checklist, a set of standard guidelines, and a comparison table to reduce back-and-forth confirmations and ensure more accurate quotes.

Response Method
Email / Phone
File format
PDF / Paper
Standard System
ASTM / ASME

Inquiry checklist

Prepare these 7 items before requesting a quote

The more complete the information, the closer the quote will be to the final deal terms. We'll confirm any missing details in our response.

Technical Consultation
  1. 01

    Required alloy grade or equivalent grade, e.g., NiCr8020, Evanohms®

  2. 02

    Supply Forms: Strip / Foil / Bar / Wire / Tube

  3. 03

    Size requirements: thickness, width or diameter, and length with roll weight

  4. 04

    Quantity and Delivery Schedule: Pilot Run Quantity, Batch Size, and Expected Delivery Date

  5. 05

    Material Condition: Soft / Cold-worked / Aged; Surface Requirements

  6. 06

    Applicable Standards and Required Documentation to Be Provided with the Shipment

  7. 07

    Subsequent processes: stamping, etching, welding, or winding

Strip/Bar/Tube Calculator

Weight and Unit Conversion

Theoretical weight estimation for strip, round bar, and pipe in three forms: calculate weight by length or derive length from target weight. Unit conversion covers length, weight, and thickness.

The result is a theoretical value calculated based on the typical density for each grade. The actual weight shall be confirmed by weighing and allowable tolerance.

Weight Estimate

Weight133.35kg
Weight per meter1.3335kg/m
Length per kilogram749.906m/kg
Corresponding Length74,990.63m

Unit Converter

Results1,000mm

1 in = 25.4 mm, 1 mil = 0.0254 mm, 1 lb = 0.45359237 kg.

Standards

Standards and Regulations

We organize production according to our system and provide conformity statements based on customer market requirements. Specific grade conformity is subject to the order confirmation document.

ISO 9001 Quality Management System
Organize order review, process control, and nonconforming product disposition per system requirements. Certification certificate number documentation to be added.
RoHS 2015/863/EU
Limits the content of lead, cadmium, mercury, hexavalent chromium, and other substances; all product lines comply with the directive.
WEEE 2012/19/EC
For the recycling and disposal of waste electrical and electronic equipment, the product provides information in accordance with the directive requirements.
REACH
Most products comply with REACH regulations. Grades containing Substances of Very High Concern (SVHC) are confirmed individually per order.
ASTM / ASME
Components, mechanical properties, and inspection items are organized by standard system. Standard numbers are subject to the quotation and certificate of quality.

Certificate number, test report, and authorization documents are pending. Contact us for the current version.

Conversion

Hardness vs. Tensile Strength Conversion

Quickly verify if material status aligns with downstream forming processes. Values are approximate conversions and do not replace official test reports.

HVHRCTensile Strength (Approx.)
120—≈ 420 MPa
180—≈ 620 MPa
24020.5≈ 800 MPa
30029.5≈ 1000 MPa
36037.5≈ 1200 MPa
42043.5≈ 1400 MPa

Conversion factors vary by alloy system; stainless steels and nickel-based alloys should not be directly interchanged.

Glossary

Glossary

Six common manufacturing terms in communication: align on definitions before discussing specifications.

Multi-pass rolling of the strip below the recrystallization temperature, combined with inter-pass annealing to control thickness and grain size, yields a thin, uniform strip.

Flatness across the strip width, commonly affected by edge wave, center wave, and buckling, is determined by roll crown and tension distribution.

Pass the strip through staggered leveling rolls to induce repeated bending, relieving internal stresses and improving flatness.

Slit wide coils into narrow strips using a rotary slitter; strip width and edge quality are determined by the cutter shaft configuration.

The relative change in resistance per 1K temperature variation; precision resistor alloys aim for this value to be close to zero.

The mechanical state of the material—commonly soft (annealed), cold-worked (hardened), or aged—directly affects its strength and formability.

FAQ

FAQ

Minimum order quantity varies by grade, specification, and form. Trial runs can be negotiated in small batches; bulk orders are subject to the official quotation.

Batch-specific component and mechanical property test records are available; specific items and standard numbers will be agreed upon during order confirmation.

Thinner thickness and narrower width require more rolling and slitting passes. Lead time is estimated after receiving specifications and quantity, subject to formal confirmation.

Slitting width down to 0.5mm. Coil weight and diameter can be customized per your production line requirements; please provide layout or weight range when placing the order.