Nickel alloys
Super Invar
Extremely low coefficient of thermal expansion, high dimensional stability, ideal for precision optical structures
- Material System
- Nickel Alloy
- Available Forms
- Strip / Bar
- Thickness Range
- 0.10 – 3.00 mm

Material Overview
Fe-Ni-Co Ultra-Low Expansion Alloy (K93500) has a thermal expansion coefficient near room temperature lower than conventional Invar, making it ideal for laser cavities, optical platforms, and precision measuring instruments.
Alias / Benchmark:Ultra-low expansion alloy / UNS K93500
Available Forms
Strip · Bar
Thickness / Diameter
0.10 – 3.00 mm/ Ø5.00 – 80.00 mm
Width
5 – 300 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Average Expansion Coefficient | ≤ 1.0 ×10⁻⁶/°C (at 0 – 100 °C, typical) |
| Tensile Strength | ≥ 480 MPa (annealed) |
| Supply Status | Annealing |
| Process | Machinable / Polishable |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Confirm by Order Standard
Typical Applications
- Laser cavity
- Optical table
- Precision measuring instruments
Same category brand
- NiCr8020High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance
- Evanohms®Low temperature coefficient of resistance, long-term resistance stability, and excellent processability
- Custantan®Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift