Nickel alloys
Inconel X-750 / 751
High-temperature springs and fasteners: Commonly used, anti-relaxation, oxidation-resistant
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil / Bar
- Thickness Range
- 0.05 – 3.00 mm

Material Overview
Nickel-chromium precipitation-hardening alloy (N07750 / N07751), which maintains elasticity and resistance to stress relaxation below 800 °C, is commonly used for high-temperature springs, turbine fasteners, and nuclear reactor components.
Alias / Benchmark:UNS N07750 / N07751
Available Forms
Strip · Foil · Bar
Thickness / Diameter
0.05 – 3.00 mm/ Ø3.00 – 60.00 mm
Width
5 – 300 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 1240 MPa (aged condition) |
| Yield Strength | ≥ 790 MPa (aged condition) |
| Operating temperature | ≤ 800 ℃ |
| Supply Status | Solution + Aging |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
AMS 5598ASTM B637
Typical Applications
- High-temperature spring
- Turbo Fasteners
- Nuclear reactor components
Same category brand
- NiCr8020High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance
- Evanohms®Low temperature coefficient of resistance, long-term resistance stability, and excellent processability
- Custantan®Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift