Nickel alloys

Ni-Span-C 902

Low temperature coefficient of elastic modulus, stable frequency, and resistance to relaxation

Material System
Nickel Alloy
Available Forms
Strip / Foil / Wire
Thickness Range
0.05 – 1.50 mm
Ni-Span-C 902 Constant-Modulus Alloy / UNS N09902

Material Overview

Invar alloy (N09902) exhibits minimal variation in elastic modulus with temperature at room temperature and is used for resonant components, pressure sensor diaphragms, and precision instrument springs.

Alias / Benchmark:Elinvar Alloy / UNS N09902

Available Forms

Tape · Foil · Wire

Thickness / Diameter

0.05 – 1.50 mm/ Ø0.10 – 6.00 mm

Width

2 – 200 mm

Supply Status

Soft / Cold-worked / Aged, as agreed in the order

Mechanical and Physical Properties

ProjectReference Range
Tensile Strength1000 – 1300 MPa (aged condition)
Temperature coefficient of elastic modulusConfirm by Grade and Heat Treatment
Supply StatusCold working + Aging
MagneticWeak magnetism
Grain Size / Surface DefectsUpdating data

Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.

Applicable Standards

Confirm by Order Standard

Typical Applications

  • Resonant element
  • Pressure sensor diaphragm
  • Instrument Spring

Same category brand