Nickel alloys
Hiperco 50
High saturation magnetic flux, large magnetostriction, suitable for high-power magnetic circuits
- Material System
- Nickel Alloy
- Available Forms
- Strip / Bar
- Thickness Range
- 0.05 – 2.00 mm

Material Overview
Iron-cobalt soft magnetic alloy (49Co-2V-Fe) offers higher saturation magnetic induction than silicon steel and permalloy; used in aircraft generators, motor stators/rotors, and electromagnet pole pieces.
Alias / Benchmark:Iron-Cobalt Soft Magnetic Alloy / UNS R30005
Available Forms
Strip · Bar
Thickness / Diameter
0.05 – 2.00 mm/ Ø5.00 – 80.00 mm
Width
5 – 300 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Saturation Induction | Approx. 2.3 – 2.4 T |
| Cobalt content | About 49% |
| Supply Status | Annealing / Cold Rolling |
| Applicable Operating Conditions | High Power Density Magnetic Circuit |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Confirm by Order Standard
Typical Applications
- Aircraft Generator
- Stator and rotor
- Electromagnet pole face
Same category brand
- NiCr8020High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance
- Evanohms®Low temperature coefficient of resistance, long-term resistance stability, and excellent processability
- Custantan®Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift