Nickel alloys
Ni200
High electrical and thermal conductivity, resistance to alkali and neutral medium corrosion, and excellent deep-drawing performance
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil / Tube
- Thickness Range
- 0.001 – 5.00 mm

Material Overview
Industrial pure nickel strip for battery tabs, electronic component enclosures, and chemical equipment linings; available in annealed or cold-worked condition.
Alias / Benchmark:Pure Nickel 99.6%
Available Forms
Tapes · Foils · Tubes
Thickness / Diameter
0.001 – 5.00 mm/ Ø0.50 – 60.00 mm
Width
2 – 1000 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Nickel Content | ≥ 99.6 % |
| Conductivity | Approximately 22 % IACS |
| Supply Hardness | Soft / Semi-hard / Hard |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
ASTM B162GB/T 2054
Typical Applications
- Battery terminal
- Electronic Components
- Chemical Lining
Same category brand
- NiCr8020High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance
- Evanohms®Low temperature coefficient of resistance, long-term resistance stability, and excellent processability
- Custantan®Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift