Nickel alloys
Elgiloy
High elasticity, fatigue resistant, corrosion resistant, non-magnetic
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil / Wire
- Thickness Range
- 0.02 – 2.00 mm

Material Overview
Cobalt-chromium-nickel-molybdenum spring alloy (R30003) offers high strength and excellent stress relaxation resistance after cold working and aging. Ideal for precision springs, medical device elastic components, and watch balance springs.
Alias / Benchmark:Co-Cr-Ni-Mo Elastic Alloy / UNS R30003
Available Forms
Tape · Foil · Wire
Thickness / Diameter
0.02 – 2.00 mm/ Ø0.10 – 8.00 mm
Width
2 – 200 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | 1800 – 2000 MPa (cold working + aging) |
| Elastic Modulus | Approximately 190 GPa |
| Magnetic | Non-magnetic |
| Supply Status | Cold Working / Aging |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Confirm by Order Standard
Typical Applications
- Precision Springs
- Medical device spring
- Hairspring
Same category brand
- NiCr8020High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance
- Evanohms®Low temperature coefficient of resistance, long-term resistance stability, and excellent processability
- Custantan®Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift