Nickel alloys
Inconel 600
High-temperature oxidation resistance, alkali and chloride stress corrosion resistance, and stable high-temperature strength
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil / Bar / Tube
- Thickness Range
- 0.05 – 3.00 mm

Material Overview
Nickel-chromium-iron alloy (UNS N06600) is stable in high-temperature oxidizing and alkaline environments, offers resistance to chloride stress corrosion, and is used for heating element sheaths, heat treatment fixtures, and chemical processing equipment.
Alias / Benchmark:UNS N06600 / 2.4816
Available Forms
Strip · Foil · Bar · Tube
Thickness / Diameter
0.05 – 3.00 mm/ Ø6.00 – 100.00 mm
Width
5 – 600 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 550 MPa (annealed) |
| Yield Strength | ≥ 240 MPa (annealed) |
| Recommended Temperature | ≤ 1000 ℃ |
| Density | 8.47 g/cm³ |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Heating element sheath
- Heat treatment fixture
- Chemical Equipment
Same category brand
- NiCr8020High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance
- Evanohms®Low temperature coefficient of resistance, long-term resistance stability, and excellent processability
- Custantan®Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift