Nickel alloys
Monel 400
Saltwater, hydrofluoric acid resistant; excellent machinability; medium strength
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil / Bar / Tube
- Thickness Range
- 0.05 – 3.00 mm

Material Overview
Nickel-copper alloy (UNS N04400) offers excellent corrosion resistance in seawater, salt solutions, and hydrofluoric acid. It features good machinability and weldability, making it ideal for seawater heat exchanger tubes, pump and valve components, and fasteners in marine engineering applications.
Alias / Benchmark:UNS N04400 / 2.4360
Available Forms
Strip · Foil · Bar · Tube
Thickness / Diameter
0.05 – 3.00 mm/ Ø6.00 – 100.00 mm
Width
5 – 600 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 550 MPa (annealed) |
| Yield Strength | ≥ 240 MPa (annealed) |
| Density | 8.80 g/cm³ |
| Compatible Media | Seawater / Salt solution / Hydrofluoric acid |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Seawater heat exchanger tubes
- Pump and Valve Components
- Marine Engineering Fasteners
Same category brand
- NiCr8020High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance
- Evanohms®Low temperature coefficient of resistance, long-term resistance stability, and excellent processability
- Custantan®Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift