Nickel alloys
Inconel 625
High-temperature strength, fatigue resistance, and chloride stress corrosion cracking resistance
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil
- Thickness Range
- 0.05 – 3.00 mm

Material Overview
Ni-Cr-Mo-Nb solid-solution strengthened alloy strip for thin-walled components in aerospace, chemical, and marine engineering that withstand high temperatures and corrosion.
Alias / Benchmark:UNS N06625
Available Forms
Tapes · Foils
Thickness / Diameter
0.05 – 3.00 mm
Width
5 – 600 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 830 MPa (annealed) |
| Yield Strength | ≥ 415 MPa (annealed) |
| Operating temperature | −196 – 980 ℃ |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
ASTM B443AMS 5599
Typical Applications
- Aerospace thin-walled components
- Chemical Equipment
- Offshore Engineering
Same category brand
- NiCr8020High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance
- Evanohms®Low temperature coefficient of resistance, long-term resistance stability, and excellent processability
- Custantan®Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift