Nickel alloys
Inconel 718
Precipitation-hardening superalloy; stable strength from cryogenic temperatures up to 650 °C; fatigue resistant
- Material System
- Nickel Alloy
- Available Forms
- Strip / Foil / Bar / Tube
- Thickness Range
- 0.05 – 3.00 mm

Material Overview
Nickel-iron-based precipitation-hardening alloy (N07718), heat-treated via two-step aging to achieve high strength and stability at low temperatures down to 650 °C. Ideal for aerospace fasteners, turbine disks, and cryogenic storage components.
Alias / Benchmark:UNS N07718 / 2.4668
Available Forms
Strip · Foil · Bar · Tube
Thickness / Diameter
0.05 – 3.00 mm/ Ø6.00 – 100.00 mm
Width
5 – 400 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 1240 MPa (aged condition) |
| Yield Strength | ≥ 1035 MPa (aged condition) |
| Operating temperature | -250 – 650 ℃ |
| Supply Status | Solution / Aging |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
AMS 5596ASTM B670
Typical Applications
- Aerospace Fasteners
- turbine disk
- Cryogenic Storage and Transportation Components
Same category brand
- NiCr8020High resistivity, high-temperature oxidation resistance, and stable temperature coefficient of resistance
- Evanohms®Low temperature coefficient of resistance, long-term resistance stability, and excellent processability
- Custantan®Low thermoelectric EMF, oxidation-resistant, and minimal long-term resistance drift