Copper alloys
C11000
High electrical and thermal conductivity, cost-effective, excellent formability and weldability
- Material System
- Copper Alloy
- Available Forms
- Strip / Foil / Bar
- Thickness Range
- 0.02 – 3.00 mm

Material Overview
Electrolytic tough-pitch copper strip/foil with conductivity approaching pure copper levels, used for busbars, connector terminals, shielding components, and heat-dissipation stamped parts.
Alias / Benchmark:Electrolytic Tough Pitch (ETP) Copper
Available Forms
Strip · Foil · Bar
Thickness / Diameter
0.02 – 3.00 mm
Width
2 – 600 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Conductivity | ≥ 100 % IACS |
| Tensile Strength | 220 – 260 MPa (annealed) |
| Supply Status | Soft / 1/2 Hard / Hard |
| Surface | Bright / Tin-plated |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
ASTM B152UNS C1000
Typical Applications
- Busbar
- Connector terminal
- Shielding component
Same category brand
- CuBe2High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable
- CuBe2 HardenedSupplied in work-hardened condition; high strength after forming with minimal springback
- CuNi2BeHigher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.