Copper alloys
C86300
High load-bearing capacity, wear-resistant, and impact-resistant
- Material System
- Copper Alloy
- Available Forms
- Bars / Pipes
- Thickness Range
- Confirm on demand

Material Overview
Manganese bronze cast extruded bars and tubes offer superior load-bearing and wear resistance, ideal for heavy-duty bearings, worm gears, and wear-resistant components in large machinery.
Alias / Benchmark:Manganese Bronze
Available Forms
Billets · Pipes
Thickness / Diameter
Confirm on demand/ Ø20.00 – 150.00 mm
Width
Confirm on demand
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 760 MPa |
| Yield Strength | ≥ 450 MPa |
| Hardness | HB 210 – 260 |
| Applicable Operating Conditions | Heavy Load / Low-Speed Sliding |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
ASTM B584UNS C86300
Typical Applications
- Heavy-duty bearings
- Worm gear
- wear-resistant bushing
Same category brand
- CuBe2High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable
- CuBe2 HardenedSupplied in work-hardened condition; high strength after forming with minimal springback
- CuNi2BeHigher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.