Copper alloys
C71500
Resistant to high-speed seawater erosion, stress corrosion cracking, and offers high strength.
- Material System
- Copper Alloy
- Available Forms
- Strip / Tube
- Thickness Range
- 0.10 – 3.00 mm

Material Overview
Copper-nickel alloy (70/30) strip and tube, offering superior resistance to seawater flow erosion compared to B10. Ideal for condenser tubes, desalination systems, and marine applications.
Alias / Benchmark:White Copper B30 (70/30)
Available Forms
Strip · Tube
Thickness / Diameter
0.10 – 3.00 mm/ Ø6.00 – 80.00 mm
Width
5 – 400 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 340 MPa (annealed) |
| Flow Rate Compatibility | Above B10 |
| Compatible Media | Seawater / High-flow conditions |
| Supply Status | Annealing |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
ASTM B111UNS C1500
Typical Applications
- Condenser tube
- Seawater Desalination Equipment
- Ship Systems
Same category brand
- CuBe2High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable
- CuBe2 HardenedSupplied in work-hardened condition; high strength after forming with minimal springback
- CuNi2BeHigher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.