Copper alloys
C63000
High strength, wear- and corrosion-resistant, cavitation-resistant
- Material System
- Copper Alloy
- Available Forms
- Bars / Pipes
- Thickness Range
- Confirm on demand

Material Overview
Nickel-aluminum bronze bars and tubes offer superior strength and wear resistance compared to standard aluminum bronze, making them ideal for pump shafts, valve stems, gears, and heavy-duty components in marine engineering.
Alias / Benchmark:Nickel Aluminum Bronze
Available Forms
Billets · Pipes
Thickness / Diameter
Confirm on demand/ Ø10.00 – 120.00 mm
Width
Confirm on demand
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Tensile Strength | ≥ 690 MPa |
| Yield Strength | ≥ 310 MPa |
| Hardness | HB 180 – 240 |
| Applicable Operating Conditions | Seawater / Heavy-duty wear |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
ASTM B150UNS C3000
Typical Applications
- Pump shaft
- stem
- Heavy-duty gear
Same category brand
- CuBe2High strength and high elasticity, excellent electrical and thermal conductivity, age-hardenable
- CuBe2 HardenedSupplied in work-hardened condition; high strength after forming with minimal springback
- CuNi2BeHigher electrical conductivity than CuBe2, stress-relaxation resistant, supplied in the work-hardened (rolled) condition.