Other alloys
Titanium Alloys
High strength-to-weight ratio, excellent corrosion resistance; select pure titanium or alloy grades based on application.
- Material System
- Other alloys
- Available Forms
- Strip / Foil / Bar / Tube
- Thickness Range
- 0.01 – 3.00 mm

Material Overview
Covers strip, bar, and tube grades of commercial pure titanium Gr1–Gr4, Ti-6Al-4V (Gr5), and Ti-3Al-2.5V (Gr9). Pure titanium prioritizes formability and corrosion resistance; Gr5 emphasizes strength. Select the grade based on part load requirements and manufacturing processes.
Alias / Benchmark:Gr1 / Gr2 / Gr5 (Ti-6Al-4V) / Gr9
Available Forms
Strip · Foil · Bar · Tube
Thickness / Diameter
0.01 – 3.00 mm/ Ø3.00 – 100.00 mm
Width
3 – 500 mm
Supply Status
Soft / Cold-worked / Aged, as agreed in the order
Mechanical and Physical Properties
| Project | Reference Range |
|---|---|
| Grade Range | Gr1 / Gr2 / Gr5 / Gr9 |
| Tensile Strength | 240 – 1000 MPa (by grade) |
| Density | 4.51 g/cm³ |
| Supply Status | Annealing / Cold Rolling |
| Grain Size / Surface Defects | Updating data |
Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.
Applicable Standards
Typical Applications
- Aerospace structural components
- Medical Devices
- Chemical Heat Exchanger