Clad materials

Copper-Steel Clad

Combines copper layer conductivity with steel layer strength; clad thickness is customizable by ratio.

Material System
Composite materials
Available Forms
Strip / Foil
Thickness Range
0.015 – 1.50 mm
Cu-Steel Clad

Material Overview

Bimetallic strip produced by roll-bonding copper and steel, combining conductivity with structural strength for battery tabs, shielding components, and conductive structures. Cladding thickness accounts for 0.001% – 70% of the total strip thickness; cladding width is 1 – 100 mm.

Alias / Benchmark:Copper-Steel Composite Strip

Available Forms

Tapes · Foils

Thickness / Diameter

0.015 – 1.50 mm

Width

3 – 100 mm

Supply Status

Soft / Cold-worked / Aged, as agreed in the order

Mechanical and Physical Properties

ProjectReference Range
Strip Thickness0.015 – 1.50 mm
Strip Width3 – 100 mm
Laminate thickness0.001% – 70% of strip thickness
Multilayer Width1 – 100 mm
Grain Size / Surface DefectsUpdating data

Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.

Product Specifications & Structure

Composite Strip Specification Table and Cladding Structure Diagram
Composite Product Specifications (Thickness, Width, Cladding Thickness & Width) and Illustration of Common Cladding Structures

Applicable Standards

Confirm by Order Standard

Typical Applications

  • Battery terminal
  • Electromagnetic Shielding Component
  • Conductive structural components

Same category brand