Other alloys

316L Stainless

Ultra-low carbon, intergranular corrosion resistant after welding, excellent deep-draw formability

Material System
Other alloys
Available Forms
Strip / Foil / Bar / Tube
Thickness Range
0.005 – 3.00 mm
316L Stainless 022Cr17Ni12Mo2 / UNS S31603 / 1.4404

Material Overview

Ultra-low carbon austenitic stainless steel (S31603 / 1.4404), which resists carbide precipitation after welding. Ideal for welded structural components, medical device housings, and deep-drawn parts.

Alias / Benchmark:022Cr17Ni12Mo2 / UNS S31603 / 1.4404

Available Forms

Strip · Foil · Bar · Tube

Thickness / Diameter

0.005 – 3.00 mm/ Ø3.00 – 100.00 mm

Width

3 – 600 mm

Supply Status

Soft / Cold-worked / Aged, as agreed in the order

Mechanical and Physical Properties

ProjectReference Range
Tensile Strength≥ 485 MPa
Yield Strength≥ 170 MPa
Carbon content≤ 0.03 %
Density8.00 g/cm³
Grain Size / Surface DefectsUpdating data

Values in the table are typical references and may vary by specification, condition, and batch. Final warranty data is governed by the order confirmation document.

Applicable Standards

ASTM A240GB/T 4237

Typical Applications

  • Welded Structural Components
  • Medical device housing
  • deep-drawn parts

Same category brand